[电]输出电平；输出级

output devices───输出设备（outputdevice的复数）

output device───[计]输出设备

support level───维持点；[金融]维持价；支持价位

datum level───基准面；基准平面；高程基淮

dumpy level───[测]定镜水准仪

true level───真实水平

support levels───支持水准，干预水平

This already exceeded current output level actually.───这实际上已超出目前的产量水平.

The default server console output level is INFO.───缺省服务器控制台输出级别为INFO。

Te output level is affected both in the short run and in the long run.───产出水平在长期和短期都受到影响。

It must be able to determine a price by adjusting output level.───它必须有透过调整产量来决定市场价格的能力.

Use, if necessary, P 25 in order to re - adjust the output level.───为了再次调整输出标准, 如果必须, 使用P25.

The message output level is configurable to several different levels.───此消息输出配置为几种不同的级别。

A condenser microphone always has the same output level as a dynamic microphone.───电容话筒的输出电平和动圈话筒一样高.

Te output level is affected both in the short run and in the long run.───自然产出水平在长期和短期都受到影响.

Adjust P 29, if necessary, so as to obtain the output level required.───调整P29, 如果必须, 以致获得所需的输出标准.

This control allows you to set the maximum peak output level of the 166XL regardless of any other control.

Such branch lines are of course vulnerable to changes in output level or distribution policy of their users.

This changing "reactive" load causes the amp output level to change with frequency and changes in speaker impedance (a dynamic thing that changes as the speakers are driven harder).

The first and second detected light levels are processed to derive a first value representing the ambient light level and a second value representing the illumination source output level.

On the other hand, the output level of manufactured products, which is of concern to consumers, is well determined.

A single trigger pulse generating circuit outputs a pulse signal when an output level of an amplifying unit is changed.

A lamp lighting system allows dimming of a compact gas discharge lamp to a low light output level without perceptible flicker.

A condenser microphone always has the same output level as a dynamic microphone.

This method uses at least two light sensor measurements to derive information concerning both the ambient light levels and the illumination source output level for known drive conditions.