固溶退火；[冶]溶体处理

固溶退火，溶体处理; 固溶处理

radiation treatment───放射疗法，放疗；放射线处理；射线防腐

insulin treatment───胰岛素治疗

radiation treatments───放射疗法，放疗；放射线处理；射线防腐

conventional treatment───常规处理

beauty treatment───美容

cosmetic treatment───美化工程

hormone treatment───激素治疗

It includes the effect of manganese content, solution treatment temperature and cooling rate on the non equilibrium segregation of manganese and condition of segregation formation.───研究了锰的质量分数、固溶处理温度和淬火冷却速度对锰不平衡偏聚的影响和不形成锰偏聚的条件。

Flow injection technique is a solution treatment technique under nonhomogeneous and unbalanced condition and has gained wide application in food analysis.───流动注射是一种非均匀非平衡状态下的溶液处理技术，在食品分析领域中的应用日益广泛。

experimental results show that, under solution treatment condition, this alloy has lower cold-crack susceptibility.───结果表明，固溶处理状态下母材氩弧焊时具有较低的冷裂纹敏感性。

The influences of solid solution treatment processes on damping properties can be explained by the G-L theory.───固溶处理工艺对合金阻尼性能的影响规律可用G-L理论来解释。

Adding elements of Zr and Cr can increase the tensile strength, and electric conduction can be improved by solution treatment.───同时，铬和锆的存在可提高合金的抗拉强度；采用固溶处理使合金具有高导电性能。

Solution treatment parameters have great influences on the microstructure and mechanical properties of rheology die casting.───固溶处理工艺参数对流变压铸零件组织和性能有较大的影响。

Pitting corrosion and filiform corrosion occurred after solution treatment and ageing treatment.───而镁钙合金经固溶处理和时效处理后则出现点蚀和丝状腐蚀。

The distributing law of residual stress on surface of bellows after solution treatment. was analyzed.───分析了波纹管固溶处理后表面残余应力的分布规律；

Solution treatment temperature has a significant impact on the tensile strength and elongation.───固溶处理温度对抗拉强度和延伸率有较大的影响。

Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.

The temperature of solid solution treatment affected not only the degree of the second phase dissolved in the matrix alloy, but also the recovery and recrystallization processing level of the alloy.

Effects of master alloy of quasicrystal containing magnesium additions and solution treatment on microstructure and mechanical properties of AZ91 magnesium alloy were studied.

This paper deals with the low frequency damping of ZA27 alloy with solid solution treatment after natural ageing stability.

The results show that the suitable solution treatment process can reduce the size and amount of coarse second phases effectively and then increase the super-saturation degree of alloy elements.

Pitting corrosion and filiform corrosion occurred after solution treatment and ageing treatment.

Solution treatment is helpful to meliorate the electrochemical property and to improve the electrochemical stability of the cold worked material in corrodent medium.