[力]剪力，剪切力

shear zone───剪切区域；[地质]剪碎带

spent force───消耗的兵力

swear for───保证；担保

the force───军力；警察；原力（歌名，TheForce）；铁警雄风（电影名，TheForce）

weak force───弱作用力；弱核力；弱相互作用

sheer force of───纯粹的力量

nuclear force───[物]核力

special force───特殊力量

spent forces───消耗的兵力

Abstract: shear force is interrelating with width and thickness of plate and obliquity of knife-edge.───文摘：斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.───斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.

Shear force is implicit in the development of bending moments.───杆中的剪力在弯矩的推导中是不明显的.

For any load the function from load is in multiplication shear force by antisymmetry load.───任意荷载的作用含反对称荷载分量的图乘剪力的作用.

Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.───剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.───文摘: 斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.

Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline.───剪力图按指明的方式来画, 负剪力画在基线以下.

The new self suction phase - dispersing reactor can produce good dispersing effect at low shear force.───自吸式相分散器对溶液的剪切力较低,分散效果好.

The main path of ultrasonic sludge disintegration was the mechanical effect of hydraulic shear force.

The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

Shear force is implicit in the development of bending moments.

Formula for internal resistance ratio under a quick section - load, expressions on sectional flexural torque and shear force when rod bent are given.

The design curves of equivalent damping ratio to the brace stiffness, and ratio of maximum damping force of the damping device to the inter-story yield shear force of the structure are proposed.

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline.

The dynamics analysis of shear structure mainly includes the calculation of the maximum shear force, shear angle and shear power, which provides the basis for choosing motor.